Grant programmes

Our company PEŠEK Machinery s.r.o. is implementing in the period 2021-23 the project Development and innovation of the mould carrier PEŠEK Machinery s.r.o., which is financed from the funds and thanks to the support of the European Union.

Thanks to the support of the European Union through the European Regional Development Fund, we were able to implement the project Development and innovation of mould carrier PEŠEK Machinery s.r.o. with registration number CZ.01.1.02/0.0/0.0/20_321/0025040, whose total estimated budget is 7.629.151,- CZK without VAT. The project is implemented with a partner - research organization COMTES FHT a.s. The cost of our company is 4.759.646,- CZK, the cost of the research partner is 2.869.505,- CZK. The expected support of our company is 2.901.326,70 CZK and the expected support of COMTES FHT a.s. is 2.439.079,- CZK.

The project is focused on the development of a modular mould carrier system with a focus on higher dimensional moulds. A typical product is a ceiling panel for passenger cars, which is made in a mould that is fixed in the mould carrier. The modularity of the machine will focus primarily on the drive system of the carrier and the dimensional scalability of the machine. The project addresses the problem of modularity in the design of the mould carrier, thus simplifying its production and, more importantly, the cost of development and production of individual components. The appropriate rigidity of the machine, which affects the foaming process and the scrap rate of production, will be maintained.

The aim of the project is to develop a mould carrier design that will allow, with minimal changes, the design of a mould carrier for moulds of different dimensions and weights using the unified components of the modular system.

This will support the competitiveness of our company in the design of new mould carriers, which will not only expand the existing portfolio of machines offered, but above all will allow a more flexible response to customer requirements in the field of basic structural elements and drives of these machines, precisely because the mould carriers will be assembled as modular assemblies.

The project will include the development and research of the carrier design, consisting in the analysis of existing machine solutions, as well as the conceptual design of the modular mould carrier and the specification of the basic technical parameters and their scope. Based on these, a conceptual 3D model will be prepared and strength calculations and analyses will be performed.

After their evaluation, a modular carrier design will be proposed, including the selection of the right type of drive. This will be followed by fabrication of the structural nodes of the modular system, mechanical testing of these structural nodes and their optimization.

At the end of the project, production documentation and supporting documentation for promotional materials will be developed, including operating and maintenance instructions for the equipment.

Our company PEŠEK Machinery s.r.o. greatly appreciates this assistance from the European Union and thanks it for its support in its innovation efforts.

Our company PEŠEK Machinery s.r.o. is implementing in 2022 the project Optimization of business processes of PEŠEK Machinery s.r.o., which is financed from the funds and thanks to the support of the European Union.

Thanks to the support of the European Union through the European Regional Development Fund, we were able to implement the project Optimization of business processes PEŠEK Machinery s.r.o. with registration number CZ.01.1.02/0.0/0.0/20_358/0027850, whose budget was CZK 487,357.- excluding VAT, while our company received a 75% subsidy of CZK 365,517.75.

The subject of the project is the implementation of all necessary activities to optimize production and support processes in order to optimize the entire functioning and management of the company and production of PEŠEK Machinery s.r.o. The project includes the necessary analysis of the current state of the processes, definition of weak points in the management and production organization and subsequent implementation of management optimization in order to adjust the process, organizational and production processes to minimize input production costs.

Our company PEŠEK Machinery s.r.o. greatly appreciates this assistance from the European Union and thanks it for its support in its innovation efforts.

Our company PEŠEK Machinery s.r.o. is implementing in 2022 the project Automatic Data Processing Tool, which is co-financed by the European Union.

The purpose of the data tool is to automate the processing of all internal input data, including editing and standardization. Subsequently, it is necessary to automatically evaluate the data, highlight critical points in the system and at the same time it will be possible to predict potential scenarios for the company's future development.

Our company PEŠEK Machinery s.r.o. is implementing the project Digitalization of processes in the company PEŠEK Machinery s.r.o. in the period 2021-2023, which is financed from the funds and thanks to the support of the European Union.

Thanks to the support of the European Union through the European Regional Development Fund, we are implementing the project Digitalization of processes in the company PEŠEK Machinery s.r.o. with the registration number CZ.01.4.04/0.0/0.0/21_376/0027609, whose budget amounts to CZK 2,568,799.50 excluding VAT, while our company received a 40% subsidy of CZK 1,027,519.80.

The project Digitalization of Pešek Machinery s.r.o. primarily addresses the existing issue of enormous time consumption, especially of design and related TPV processes, which is reflected in all phases of the product life cycle, from the preparation of quotations, development of equipment, preparation of documents for production, production planning, production, assembly and shipment to the customer to maintenance and service tasks. Currently, too many routine activities are identified in the enterprise as being handled by employees, which are also at high risk of human error.

In addition, in order to remain competitive, Pešek Machinery s.r.o. needs to continuously innovate its existing products and develop new, often more complex mechanical systems, which cannot be done without appropriate software equipment that enables modelling and simulation of the behaviour of these systems even at the development stage, since the construction of a physical prototype is not feasible in piece production.

Because of the nature of the company's products (size, complexity), the problem of difficult-to-imagine human-machine and machine-machine interactions often arises as well. This manifests itself both during the development of the equipment, when, for example, machine kinematics, ergonomics, material flow or production line tact are addressed, but also in the area of marketing and pre-sales activities, when a potential customer would appreciate the opportunity to become familiar with the machine parameters in detail in the context of their operation.

Another issue addressed by the project is the incompleteness and inconsistency in HR processes, especially in the pre-boarding and on-boarding phase. A new job applicant or employee receives information from many sources, there is no standardised plan for basic training and the process of employee adaptation is often unnecessarily long.

The operation of the above-mentioned software tools is related to the need for an adequate IT structure and HW equipment.

Our company PEŠEK Machinery s.r.o. greatly appreciates this assistance from the European Union and thanks it for its support in its innovation efforts.

The main objective of the project was to design a spatial layout of a new production hall with optimized material flows that would meet the company's needs and enable its growth and development. The focus was on increasing production and administrative space.